Guide to Selecting and Installing Toyota Front Right Lower Ball Joint

2026-10-26

The Toyota 43330-09330 front right lower ball joint assembly is a chassis component specified for several Toyota and Lexus models. It connects the steering knuckle and control arm and bears dynamic loads during vehicle operation. Its design and manufacturing specifications are intended to support steering precision and stability across varied road conditions.

Technical characteristics and application value

The 43330-09330 ball joint assembly is a front-right chassis component developed for several core Toyota and Lexus models. It serves as a key connection point in the suspension system and affects the immediacy of steering response.

The component uses high-strength metal materials and a wear-resistant dust seal. The design is intended to resist road impacts and help extend the service life of the chassis system.

Compatible models and powertrain configurations

To support accurate chassis repair and replacement, the following applications should be checked. The part number covers engine displacements from 2.0L to 3.5L across the Camry, Avalon and Lexus ES ranges.

Brand/model	Applicable years	Engine configuration
Lexus ES240	2009.09–2012.06	2.4L 2AZ-FE
Lexus ES250	2012.06–	2.5L 2AR-FE
Lexus ES300h	2012.06–	2.5L 2AR-FXE
Lexus ES350	2006.03–2018.06	3.5L 2GR-FE
Toyota Avalon	2005.01–2018.04	2.5L/3.5L
Toyota Camry	2006.01–	2.0L/2.4L/2.5L/3.5L

Selection and installation precautions

When replacing chassis components, installers should verify not only the 43330-09330 part number but also the vehicle's production year and engine code.

Because the component is specific to the front right side, the installation position should be confirmed before fitting to avoid confusion with the left-side part. During installation, the dust boot should also be inspected for integrity, and fasteners should be tightened to original-equipment torque standards so that suspension geometry is not affected.

Frequently Asked Questions

Can the 43330-09330 be installed on the left side of the vehicle?

No. The model is designed specifically for the front right lower position. Its steering geometry and mounting angles are optimized for the right side; installation on the left would misalign suspension geometry and affect handling safety.

How can a ball joint assembly be identified as needing replacement?

Common indicators include abnormal chassis noises while driving, vague steering feel or play, and irregular tire wear. Regular chassis inspections are advised; if the ball joint dust boot is damaged or there is noticeable play at the joint, replacement should be carried out promptly.

Is a four-wheel alignment required after replacing the ball joint?

Yes. Because the ball joint directly affects front-wheel alignment parameters, a four-wheel alignment check is strongly recommended after replacement to ensure camber and toe values remain within original-equipment ranges and to prevent vehicle pull or abnormal tire wear.

Engine Mounting

Control Arm Assy

Absorber Mounting

Ball Joint

Ignition Coil

Shock Absorber Dust Cover

Automotive Belt Tensioner

Auto Shock Absorber

Wheel Hub Bearing

Starting Motor

Car Engine Electric Generator

Car Intake Pipe

Automotive Cooling System Components

Automotive Filtration System

Engine Mounting

Control Arm Assy

Absorber Mounting

Ball Joint

Ignition Coil

Shock Absorber Dust Cover

Automotive Belt Tensioner

Auto Shock Absorber

Wheel Hub Bearing

Starting Motor

Car Engine Electric Generator

Car Intake Pipe

Automotive Cooling System Components

Automotive Filtration System

Guide to Selecting and Installing Toyota Front Right Lower Ball Joint

Guide to Selecting and Installing Toyota Front Right Lower Ball Joint